Muratec KDS Laser Level with Receiver and Tripod ATL-23RSA

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Main set contents: Storage case, laser goggles (LG2), 3 AA alkaline batteries for main unit, 3 rubber caps, instruction manual Receiver: Waterproof laser receiver (LRV-4) Tripod: Laser cross tripod (LEC-2M) Vertical line, horizontal line, ground mark, outdoor use, IP54, 1 year full warranty, theft and fire warranty, laser radiation Main unit (ATL-23) specifications/light source: 635nm red semiconductor laser (ground mark: 650nm) Light output: 1mW or less Laser safety standard: Class 1M (JIS C6802) Horizontal line accuracy: ±1mm/10m Vertical line accuracy: ±1mm/10m Horizontal line irradiation angle: Approximately 120° Vertical line irradiation angle: Approximately 135° Line width: Approximately 2mm/5m Main unit (ATL-23) specifications/braking method: magnetic braking method Automatic correction range: approx. ±4° Tilt alarm: laser light flashes at approx. ±4° or more Fine adjustment range: 360°, fine adjustment possible all around Working range: indoor mode approx. 10m, outdoor mode approx. 25m (when using a receiver) Main unit (ATL-23) specifications/power supply: 3 AA alkaline batteries or rechargeable batteries *Manganese batteries cannot be used. Battery life (when fully lit): Approximately 12 hours continuous operation Operating temperature range: -10℃~+40℃ Main unit (ATL-23) specifications/Main unit dimensions: 85 x 100 x 160 mm Main unit weight: Approximately 0.8 kg (including batteries) Waterproof laser receiver (LRV-4) specifications/detection range: 1.5m to 25m *Depends on the working environment and the main unit (laser level) used. Display: Red diode (2 sets, top and bottom), blue diode (1 in the center) Center detection display: Blue diode lights up and a continuous buzzer sounds. Accuracy: Within ±1.0mm from the center of the laser line Waterproof laser receiver (LRV-4) specifications/power supply: 006P alkaline battery (9V) Auto power off time: approx. 10 minutes (manual power off possible) Continuous operation time: approx. 30 hours Body size: 140mm (length) x 68mm (width) x 26mm (thickness) Weight: 170g (including battery) Accessories: Clamp