30cm x 1 Glitter Print Sheet for Heat Transfer Rubber Sheet 11-Hematite Black/Black Meter/Glitter Iron-On Sheet, Iron-On T-Shirts, Clothes, Cotton,

―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― 🛫【Certified Store on JOOM】 A Japanese seller delivering high-quality products across borders! 📦【Shipped from Japan】 We pack carefully and deliver promptly and securely. 🔍【Strict Inspection Based on Japanese Quality Standards】 Only carefully selected products of excellent quality are delivered. 📒【Japanese Instruction Manual May Be Included】 We recommend using a text recognition app for translation. 🛍️【Some items may be based on international specifications】 Thank you for your kind understanding in advance. 👍【If you are satisfied with the product, please "Follow" our store and leave a review!】 Your support means a lot to us 💖 ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― ⚠️【Attention! Please be sure to read before purchasing】⚠️ Does this product match the conditions below? Please check carefully before placing your order. 🔌【Voltage Compatibility】 This product is designed for use in Japan and operates on 90–110V. Using it with a different voltage may cause malfunction or damage. 🔌【Plug Type】 The plug type is Type A or Type B, which is standard in Japan. You may need a plug adapter for use in other countries. 💡【Important Notes on Transformers and Adapters】 🔻 A transformer adjusts the voltage to match your device's requirements. 🔻 A plug adapter only changes the plug shape and does not convert voltage. 👉 Using only a plug adapter without a transformer may damage the product. 🚫【Disclaimer】 We are not responsible for any damage or malfunction caused by improper use without a transformer. ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―

Cotton and polyester materials are recommended, but we cannot guarantee reliable adhesion. * Adhesion may not be possible depending on the type and condition of the fabric, so be sure to test beforehand. * Cannot be used on fabrics with special treatments such as water repellency or heat-sensitive fabrics. * Thickness and texture vary depending on the color and type, so it may not be possible to cut with the same cutting settings. Always test cut and check the pressing time and peeling timing before use. Our iron-on print sheets (cutting film for ironing) allow you to easily create original T-shirts, hoodies, bags, and event supplies. Perfect for school festivals, clubs, festivals, food stalls, restaurants, Christmas, Merry Christmas, Santa, reindeer, New Year's, Halloween, entrance ceremonies, graduations, and other events. We also recommend cutting letters and logos for company and store names as promotional items. During the production process, static electricity can cause dust to accumulate between the adhesive sheet and the peel-off sheet, but this does not affect use. ●Instruction manual included. *The recommended ironing temperature is approximately 150°-160°, but this may vary slightly depending on the sheet. (Ironing temperatures may be indicated as weak, medium, or strong, but please check your instruction manual or the manufacturer for details.) [※Caution※] ●This is not something to be printed on with a printer or similar. ●We cannot be held responsible for any damage or breakage to the installed object caused by mistakes or errors during installation or application, or for any damage that occurs when removing the product. Please be aware of this. ●Please be aware that exposure to ultraviolet rays such as direct sunlight may cause fading, and that deterioration may be accelerated depending on the location and conditions of use. ●It is difficult to adhere to uneven or stretchy fabrics such as knitwear, and there is a possibility that the fabric may peel off. ●For longer life, turn the product inside out, place it in a laundry net, and wash gently in cold or lukewarm water, avoiding hot water. ●Due to the adhesion between the sheet and film, color unevenness or linear marks may appear, but this is due to the specifications. ●Please use at your own discretion and responsibility. ●If you are unsure, please try out a product of approximately A4 size. [The size may not be a perfect fit. Cut it a little longer.] Cotton or polyester materials are recommended, but we cannot guarantee complete adhesion. *Adhesion may not be possible depending on the type and condition of the fabric. Be sure to test it before use. *Cannot be used on fabrics that have been specially treated, such as water-repellent fabrics, or fabrics that are sensitive to heat. - Due to slight differences in thickness and texture depending on the color and type, it may not be possible to cut with the same cutting settings. Be sure to test it before use. Pressing time and peeling timing may also vary depending on the color and type. Be sure to test it before use. ■How to Use 1) You will need tools to cut the pre-finished design. Prepare scissors, a cutter, a cutting board, or a cutting machine if you have one, depending on your needs. Since this is a heat transfer, please also prepare a silicone sheet. (A silicone resin cooking sheet is fine!) 2) Cut out the motif design you made in advance. The design will be reversed during transfer, so create it in reverse when cutting. The glossy side will be the release film! Cut the back side Please use the iron! 3) Peel off the unnecessary parts. Carefully remove any excess material from the clear release film. 4) Once completely removed, place the design sheet and the T-shirt to be transferred onto the ironing board with the clear release film facing up and balance it. 5) Place the silicone sheet on top of the design sheet and iron at approximately 150°C-160°C for 10-20 seconds, pressing firmly and gently across the entire surface. Please note that some irons may have uneven surfaces. If you do not apply the iron firmly, the design will not adhere. The recommended ironing temperature is 150°C-160°C. (Your iron may be labeled as weak, medium, or strong, but please check your instruction manual or the manufacturer for details.) 6) Peel off the clear release film while it is still hot. Occasionally, the design may stick to the release film, so peel it off slowly and carefully. Depending on the environment, heat, and what you are applying, it may be easier to remove the design after it has cooled. [Tips] If the film does not stick well after peeling it off and it is slightly lifted, Place the Recon sheet back on and iron it to make it stick to the fabric. 7) If it's nicely pressed, it's done! If the transferred sheet has a textured fiber feel, it's perfect! This iron-on sheet makes it easy to make original T-shirts, hoodies, bags, event supplies, and more.