Panasonic Rechargeable Drill Driver Body Only Sold Dual Equipped with Tap Mode IP56 Black (Battery Pack/Charger/Case Separately) (14.4V/18V

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. Maximum tightening torque: (rigid body tightening torque) 18V = low speed 50N･m, 14.4V = low speed 40N･m, (elastic body tightening torque) 18V = high speed 12N･m/low speed 32N･m, 14.4V = high speed 10N･m/low speed 28N･m Body size: width 18.9 x depth 6.8 x height 19 Weight: 1.26g Rotation speed: 18V = high speed 70-1,800 rpm, low speed 30-530 rpm, 14.4V = high speed 70-1,450 rpm, low speed 30-430 rpm Clutch operating torque: 18 steps (approximately 0.5 to 4.4N･m in approximately 0.23N･m increments) Chuck: Keyless chuck (Φ1.5~13mm) Capacity: [Drilling/18V5.0Ah] (HIGH mode) Hole saw SPC (Φ21×1.6mm) = approx. 45 holes, (HIGH mode) Woodworking/Japanese pine (Φ15×120mm) = approx. 240 holes, ( HIGH mode) Woodworking/Japanese pine (Φ21 x 120mm) = Approx. 150 holes, (HIGH mode) Wooding core drill (Φ65 x Ceramic siding 16mm + Plywood 12mm) = Approx. 45 holes Capacity: [Drilling/18V3.0Ah] (HIGH mode) Hole saw SPC (Φ21×1.6mm) = approx. 25 holes, (HIGH mode) Woodworking/Japanese pine (Φ15×120mm) = approx. 140 holes, (HIGH mode) Woodworking/Japanese pine (Φ21 x 120mm) = Approx. 90 holes, (HIGH mode) Wooding core drill (Φ65 x Ceramic siding 16mm + Plywood 12mm) = Approx. 30 holes Capacity: [Drilling/14.4V5.0Ah] (HIGH mode) Hole saw SPC (Φ21×1.6mm) = Approx. 35 holes, (HIGH mode) Woodworking/Japanese pine (Φ15×120mm) = Approx. 160 holes, (HIGH mode) Woodworking/Japanese pine (Φ21×120mm) = Approx. 100 holes, Capacity: [Screw tightening/18V5.0Ah] (HIGH mode) Wood screws/Japanese pine Φ4.1 x 25mm = approx. 1,550 pieces, (HIGH mode) Coach screws/Japanese pine M6 x 80mm = approx. 30 0 pieces, [Screw tightening/18V3.0Ah] (HIGH mode) Wood screws, Japanese pine Φ4.1 x 25 mm = approx. 950 pieces, (HIGH mode) Coach screws, Japanese pine M6 x 80 mm = approx. 180 pieces