Hioki 3287 (clamp Meter, Clamp Tester) Clamp-on AC/DC High Tester AC/DC Current AC/DC Voltage Resistance Continuity Compact Made In Japan

・Thin, light, compact design for easy portability ・Can clamp cables with a finished outer diameter of φ35 mm or less ・Supports AC and DC current measurement, equipped with AC/DC 100 A range ・True RMS (true root mean square) suitable for measurements in noisy environments such as around inverter-using equipment ・Supports CAT III 600 V (when measuring current) and CAT III 300 V (when measuring voltage) as specified by safety standards

[Measurement items] AC current: Yes, DC current: Yes, AC+DC current: No, AC voltage: Yes, DC voltage: Yes, AC+DC voltage: No, AC power: No, DC power: No, Resistance: Yes, Temperature: No, Capacitance: No, Frequency: No, Continuity check: Yes, Diode check: No

- AC current (range): 10.00 A/100.0 A, (specified accuracy range): 0.10 A to 100.0 A, (representative accuracy): ±1.5% rdg ±5 dgt - DC current (range) 10.00 A/100.0 A, (specified accuracy range) 0.10 A to 100.0 A, (typical accuracy) ±1.5% rdg ±5 dgt - AC voltage (range) 4.200 V/42.00 V/420.0 V/600 V, (specified accuracy range) 0.400 V to 600 V, (typical accuracy) ±2.3% rdg ±8 dgt - DC voltage (range) 420.0 mV/4.200 V/42.00 V/420.0 V/600 V, (specified accuracy range) 40.0 mV to 600 V, (typical accuracy) ±1.3% rdg ±4 dgt - Resistance (range) 420.0 Ω/4.200 kΩ/42.00 kΩ/420.0 kΩ/4.200 MΩ/42.00 MΩ, (Accuracy range) 40.0 Ω to 41.99 MΩ, (Typical accuracy) ±2.0% rdg ±4 dgt

[Features] AC/DC automatic discrimination (current/voltage) ×, Display of maximum/minimum/average value of measurement value (effective value) ×, Display of maximum/minimum value of peak value (PEAK value) ×, Display of effective value of inrush current ×, Backlight ×, AUTO power save ○, AUTO range switching ○, Display value hold (manual) ○

[Power supply] 1 coin-type lithium battery (CR2032)

[Continuous use time] Approx. 25 hours

[External dimensions/weight] Approx. 57W × 180H × 16D mm, approx. 170 g

[Accessories] L9208 test lead, 9398 Carrying Case, Coin-type Lithium Battery (CR2032), Instruction Manual

[Options] - 9209 Test Lead Holder - L4933 Contact Pin (Can be connected to the tip of the included L9208. When installing, remove the cap before installing) - L4934 Small Alligator Clip (Can be connected to the tip of the included L9208. When installing, remove the cap before installing)

[Country of Origin] Japan [Please note] If the shipper/seller is not "Amazon.co.jp", the instruction manual in Japanese may not be included.

Thin, light, and compact for easy carrying Can clamp cables with a finished outer diameter of φ35 mm or less Supports AC and DC current measurement, equipped with AC/DC 100 A range True RMS (true root mean square) suitable for measurements in noisy environments such as around inverter-using equipment