Auto Gauge Japanese Motor 52mm Water Temperature 2 Color LED PEAK 548 Series

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. During sports driving that involves frequent use of high revolutions, controlling the oil and water temperatures is extremely important in maintaining the condition of the engine. The water temperature gauge is used to check whether the coolant temperature is normal or not. Whether the water temperature is normal or not has a huge effect on the engine, and if it reaches nearly 100°C during sports driving, the engine is at risk of overheating. The normal range for water temperature is 70 to 90°C. However, this range varies depending on the vehicle model and engine tuning. Uses a Japanese-made stepping motor. ○How to turn on the white LED/amber LED ＜Daytime: White/Nighttime: White＞ ・Connect the white connector on the main unit to the power cord No need to connect the orange connector on the main unit ＜Daytime Amber/Nighttime Amber＞ - Connect the orange connector on the main unit to the power cord ・No need to connect the white connector on the main unit ＜Daytime: White/Nighttime: Amber＞ ・Connect the white connector on the main unit to the power cord ・Connect the orange connector on the main unit to the parking lamp ＜Daytime: Amber/Nighttime: White＞ - Connect the orange connector on the main unit to the power cord ・Connect the white connector on the main unit to the parking lamp ○How to turn on the white LED/amber LED 1) Press the ＜set＞ button to switch to PEAK mode. When in PEAK mode, the PEAK light and text will light up. 2) When the PEAK value is displayed, press the ＜mode＞ button to erase the previous PEAK value. 3) Leave it for 10 seconds or press the ＜set＞ button to return to normal mode. When the PEAK light is not on, the gauge is in normal mode.