Product with Technical Conformity Mark and Japanese Instruction Godox Wireless Flash Trigger High Speed Sync X System with Super Large LCD Screen

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Xpro-F TTL wireless flash trigger can control flashes like camera flash, outdoor flash, studio flash, etc. with built-in Godox Wireless X system. There are 16 groups and 32 channels for wireless control and triggering. Adjust the wireless ID settings from 0 to 99, and only when the channel and wireless ID of the master and slave units are set the same, can the triggering be achieved, and the signal interference can also be effectively avoided. It can support TL auto flash, 1/8000 second high-speed synchronization, multi-flash, manual flash, flash exposure compensation, TCM conversion function, magnification function, one-shot & multi-shooting settings, group modeling lamp control, group zoom, simultaneous adjustment of all group output values, etc. Super large LCD panel, 5 group buttons and 4 function buttons design make it cheap and convenient to operate. This flash trigger can be applied to Fuji digital cameras GFX50S, X-Pro2, X-T20, X-T2, X-T1, X-Pro1, X-T10, X-E1, X-A3, X100F, X100T. Model: Xpro-F Compatible Camera: Fujifilm Digital Camera (TTL Auto Flash) Supports cameras with PC sync socket. Flash exposure control TTL auto flash: TTL manual flash: Yes Strobe flash: Yes High-speed sync: Yes Rear curtain sync: Yes Flash exposure lock: Yes Focus assist: Yes Modeling lamp: Control the modeling lamp with the flash trigger. Beep sound: Control beep sound with flash trigger. Wireless setup: The receiver can control the camera's shooting through the 2.5mm sync cord jack. Zoom setting: Adjust the zoom value with the transmitter. TCM function: Converts TTL shooting values to M node output values. Firmware upgrade: Upgrade via Type-C USB port. Memory function: settings will be saved after 2 seconds of rush operation and restored after reboot. Wireless Flash Transmission Range: About 1-100m Built-in Wireless: 2.4G Modulation Mode: MSK Channel: 32 Wireless ID: 01-99 Group: 16 Display: Super Large LCD Panel, Backlight ON/OFF Dimensions/Weight: 90x58x50mm /80g Package Contents: 1 x Xpro-F Wireless Flash Trigger 1 x Manual 1 x TUYUNG Microfiber Cloth