GLOTRENDS PCIe NVMe Conversion Adapter with Heatsink X4 Conversion Board for PCIE SSD NVMe and GEN4 Full Installation for Desktop PCs PA09-HS M.2

M.2 NVMe to PCIe 4.0 X4 Converter Adapter: Convert one PCIe X4/X8/X16 slot to M.2 Key M slot on the motherboard, you can install M.2 NVMe SSD into this Key M slot . Comes with an M.2 heatsink kit that allows cooling from 5°C to 20°C. FCC and CE certified, high reliability, stable PCIe X4 full speed: The speed of M.2 NVMe SSD is not affected and is the same as installed on the motherboard. No limit on M.2 NVMe SSD capacity: Supports 2T/4T (Note: Supports PCIe (NVMe/AHCI) 4.0/3.0 M.2 SSD, does not support M.2 SATA SSD.) To reach the full speed of PCIe 4.0 X4 (64Gbps), the CPU, motherboard PCIe slot, and PCIe M.2 SSD must all support PCIe 4.0. (Note: PCIe 4.0 is not supported on Intel CPUs below 11th generation.) Supports OS boot: Reinstall OS and setup BIOS/UEFI boot from this M.2 NVMe SSD (Note: Some motherboards are too old to support OS boot. In this case, M.2 NVMe SSD is too old to support OS boot. 2 NVMe SSD is used for storage disk. OS Compatibility: Plug & Play with Windows 11/10/8/Linux/Mac OS (Note: Does not support Windows 7). A new M.2 NVMe SSD must be initialized and formatted before it can be recognized by the computer host. Accessories: Standard profile bracket (12cm) and low profile bracket (8cm), M.2 heatsink kit (SSD standoff for 2230/2242/2260 position installation, M.2 screws, thermal pad, etc.) GLOTRENDS PA09-HS M.2 PCIe NVMe 4.0/3.0 conversion adapter with M.2 heatsink (3mm thickness), PCI-express 4.0/3.0 x4 conversion board for M.2, M.2 slot, M.2 PCIE SSD ( NVMe and AHCI), PCI-E GEN4 full speed, installation for desktop PCs