DRAW A LINE 025 Spot Light, Black, Vertical Only, Compatible with 001/002/003, D-SP-BK
Popis
DRAW A LINE This is a collaborative brand between Heian Shindo Kogyo, the leading manufacturer of tension rods, and the creative unit TENT.
Until now, tension rods have tended to be treated simply as "ideal goods," but we've redefined them as "single lines" that enrich our lives, proposing a new lifestyle that starts from there.
Specifications ■For use with Tension Rod (vertical installation) ■Product Size: 11cm W x 18cm D x 16cm H (Shade Size: 8cm dia. x 16cm dia.) ■Power Cord Length: Approximately 3m (from socket to power plug) ■Power Supply: AC 100V 50/60Hz ■Base: E26 ■Bulb Requires: Standard LED bulb, 8W or less (equivalent to 60W or less), length 115mm or less, diameter 60mm or less (Customer must provide own bulb) ■Power Consumption: 8W (LED bulb power consumption) ■Switch: Rocker switch (On/Off) ■Set Contents: 1 unit, 3 cord straps, 4 screws, 1 stapler, instruction manual ■Product Weight: 0.6 kg (including cord) ■For indoor use only
《Check Before Installation》 ● When assembling this product, please carefully read the instruction manual included with the Tension Rod to ensure proper installation. ● Incorrect or incomplete installation can cause the light to fall or tip over, resulting in injury, damage to the fixture or bulb, and damage to the surrounding area, making it extremely dangerous. ● To prevent the light from tipping over, be sure to secure the EVA pad on the ceiling side of the Tension Rod to the ceiling with a stapler (if the ceiling is made of gypsum board) or screws (if the ceiling is made of plywood). ● This light cannot be installed on ceilings made of anything other than gypsum board or plywood. ● At least two people should be present when installing the light. ● When installing using Tension Rod C, be careful not to let the insertion points on the upper and middle posts come loose. ● After installation, install the LED bulb. Also, leave the power plug unplugged until installation is complete. (Customers must provide their own bulb.) ● Use the included cord strap to prevent slack in the power cord. ● When on the floor, be careful not to trip over the power cord. ● Catching a hand or foot in the power cord or pulling too hard may cause the device to fall or tip over, resulting in injury, damage to the fixture or bulb, and damage to the surrounding area. This is extremely dangerous. ● Do not install the device near a crib or playpen, or in a location where the power cord may become wrapped around a child's body. Wrapping the power cord around a child's neck is a serious risk of suffocation. ● Products taken outside of Japan are not covered by warranty. ● We are not responsible for malfunctions or damage caused by acts of God, such as natural disasters, or improper use or modification. Product Dimensions: Width 11cm, Depth 18cm, Height 16cm [Brand Introduction] DRAW A LINE redefines tension rods, which have often been treated simply as "convenient gadgets," as "a single line" that enriches life, and proposes a new lifestyle starting from there. This product is an extremely simple structure—a single line—to which various components, such as shelves, desks, and lighting, can be attached. This lamp is designed for vertical installation and can be used in conjunction with the DRAW A LINE Tension Rod series. It attaches to the tension rod, allowing you to install lighting anywhere and in a space-saving manner. This spotlight provides pinpoint illumination. You can freely adjust the height and angle to direct light to your ideal spot. It can also be used as indirect lighting. Switch: Rocker switch (handheld on/off switch) Base: E26 Bulb required: LED bulb, standard bulb shape, 8W or less (equivalent to 60W or less), length within 115mm, diameter within 60mm. *Bulb must be provided by the customer.
